Important Steps To Take Prior To Electroplating Metal Finishing
You may have positive feelings towards an electroplating metal finish as it will give your metal parts some unique properties. Still, you have to do certain things first before this finishing process starts and ends up being a success. Here are some things to perform before electroplating metal finishing commences.
Dissemble Parts
If you're having a multi-part system receiving an electroplating metal finish, then you need to take time to disassemble the parts. If you didn't, then there is a good chance the metal finishing process won't work out. There could be areas that don't receive enough of the electroplating coating for example.
Whereas if you take apart each component and have it go through this metal finishing process individually, you'll have better coating results. That saves you from having to repeat this process or turn to something else. Then once each part has been coated, you can assemble them back to one complete system again.
Strip Away Current Metal Coatings
If you have components that already have some type of metal finish on them, you need to strip the coating first before trying to add a new electroplating metal finish. This is going to ensure the new finish applies to components correctly.
Stripping metal coatings off components isn't that hard to do. Make sure you're thorough and treat every area so that there aren't inconsistencies with the results you get.
Even Out Surfaces
You can get a lot out of electroplating metal finishing by ensuring the surfaces on components are even. That's the only way you're going to get the right results and properties out of electroplating. Polishing is the best step you can perform to get even surfaces on components receiving this special type of metal finish.
You need to polish all sides and review your polishing results at the end. If there are no bumps or structural defects in the components receiving the electroplating finish, then you can proceed to application and get quality finishing results.
There are some amazing finishes you can put on metal components today, including electroplating. If it seems appropriate for your components, make sure you prepare your components correctly by executing certain steps. These steps will help you deal with the surfaces and taking care of coatings that may already be present. These are measures you can carry out yourself or you can hire a professional company if you don't have the proper equipment.